Such as viewing, operation and remote control operation of the network camera Aterm HC100RC is I can in one this app
This application is exclusively for the NEC Platforms network camera "Aterm HC100RC".
From camera registration to viewing / operation and remote control operation, you can do it with this app.
▼ Easy camera registration
Simply read the QR code on the bottom of the camera, give it a name of your choice, and set a password to complete the pairing.
With this alone, various operations can be performed both in the room and on the go.
▼ Easy viewing and operation of the camera.
While looking at the image from the camera, you can change the direction of the camera up / down / left / right and listen to the sound coming into the microphone of the camera.
You can also change the direction of the camera using the registered preset positions.
In addition, the temperature of the room where the camera is installed is also displayed in the upper left of the camera image.
▼ Remote control registration and operation is also possible
It is possible to register the remote control of your air conditioner, TV, and lighting in the camera, and to send the signal of the registered remote control.
There are two ways to register the remote control, one is to select from the presets, and the other is to read the actual remote control signal into the infrared receiver of the camera for learning.
* Remote control registration settings can only be made within the same network as the camera.
* Your air conditioner, TV, and lighting must support infrared remote control operation.
▼ Equipped with other convenient functions
・ Convenient patrol function to check the state of the room from outside
(Look around the 10 preset positions.)
-Screenshot function to save the displayed image as a still image
[Supported version]
Android 11.x / 10.x / 9.x
And devices compatible with Google Play
(It can be used on smartphones and tablets that support the camera function.)
【Notes】
-For initial settings, you need to connect your Android device to the same network as Aterm HC100RC.
・ When making inquiries by e-mail, please set the filtering settings for your e-mail so that you can receive "support@aterm.jp.nec.com". In addition, please note that we may not be able to answer inquiries other than this application.
* QR code is a registered trademark of Denso Wave Incorporated.
From camera registration to viewing / operation and remote control operation, you can do it with this app.
▼ Easy camera registration
Simply read the QR code on the bottom of the camera, give it a name of your choice, and set a password to complete the pairing.
With this alone, various operations can be performed both in the room and on the go.
▼ Easy viewing and operation of the camera.
While looking at the image from the camera, you can change the direction of the camera up / down / left / right and listen to the sound coming into the microphone of the camera.
You can also change the direction of the camera using the registered preset positions.
In addition, the temperature of the room where the camera is installed is also displayed in the upper left of the camera image.
▼ Remote control registration and operation is also possible
It is possible to register the remote control of your air conditioner, TV, and lighting in the camera, and to send the signal of the registered remote control.
There are two ways to register the remote control, one is to select from the presets, and the other is to read the actual remote control signal into the infrared receiver of the camera for learning.
* Remote control registration settings can only be made within the same network as the camera.
* Your air conditioner, TV, and lighting must support infrared remote control operation.
▼ Equipped with other convenient functions
・ Convenient patrol function to check the state of the room from outside
(Look around the 10 preset positions.)
-Screenshot function to save the displayed image as a still image
[Supported version]
Android 11.x / 10.x / 9.x
And devices compatible with Google Play
(It can be used on smartphones and tablets that support the camera function.)
【Notes】
-For initial settings, you need to connect your Android device to the same network as Aterm HC100RC.
・ When making inquiries by e-mail, please set the filtering settings for your e-mail so that you can receive "support@aterm.jp.nec.com". In addition, please note that we may not be able to answer inquiries other than this application.
* QR code is a registered trademark of Denso Wave Incorporated.
