This application is for NEC Platforms Aterm series only. You can check Aterm and connected handsets at home or at a remote location from your smartphone.
This application is for NEC Platforms Aterm series only.
You can check the status of Aterm and connected handset at home or in a remote location.
▼In-house network can be visualized and operated
If you register the target Aterm in this application, you can check the information of the Aterm and the connected handset (PC, etc.).
You can also reboot, update the firmware, and change the radio channel for Aterm.
▼Information on how to solve poor radio waves
The app will show you where the wireless is going wrong and guide you on how to fix it.
▼Notice information from Aterm will be notified by push notification
A push notification will be sent to this application when there is a notification from Aterm.
▼ Visualization of Wi-Fi signal strength
You can check the strength of the Wi-Fi signal using the heat map function.
▼Additional functions
- Group management of Aterm in multiple locations is possible.
・Network diagram can be displayed.
*When using the Aterm WX3600HP as the base unit, the network diagram cannot be displayed.
[Supported version]
Android 9.0 or above
[Compatible Aterm series]
Aterm AX1800HP (ver1.1.4 or later. Mesh function must be enabled.)
*For other compatible Aterm series, see AtermStation (URL below).
https://www.aterm.jp/product/atermstation/special/home_network_link/
【Notes】
・Account registration is required to start this application.
- During the initial settings, it is necessary to connect the smartphone to the same network as the target Aterm.
[Operation check model]
・Sony Mobile Xperia 1 (SOV40)
・Google Pixel 3
・Google Pixel 6a
・Samsung Galaxy S10
・Samsung Galaxy S20+
・SHARP AQUOS Rc (701SH)
・OPPO Reno A
・Google Pixel 6a
You can check the status of Aterm and connected handset at home or in a remote location.
▼In-house network can be visualized and operated
If you register the target Aterm in this application, you can check the information of the Aterm and the connected handset (PC, etc.).
You can also reboot, update the firmware, and change the radio channel for Aterm.
▼Information on how to solve poor radio waves
The app will show you where the wireless is going wrong and guide you on how to fix it.
▼Notice information from Aterm will be notified by push notification
A push notification will be sent to this application when there is a notification from Aterm.
▼ Visualization of Wi-Fi signal strength
You can check the strength of the Wi-Fi signal using the heat map function.
▼Additional functions
- Group management of Aterm in multiple locations is possible.
・Network diagram can be displayed.
*When using the Aterm WX3600HP as the base unit, the network diagram cannot be displayed.
[Supported version]
Android 9.0 or above
[Compatible Aterm series]
Aterm AX1800HP (ver1.1.4 or later. Mesh function must be enabled.)
*For other compatible Aterm series, see AtermStation (URL below).
https://www.aterm.jp/product/atermstation/special/home_network_link/
【Notes】
・Account registration is required to start this application.
- During the initial settings, it is necessary to connect the smartphone to the same network as the target Aterm.
[Operation check model]
・Sony Mobile Xperia 1 (SOV40)
・Google Pixel 3
・Google Pixel 6a
・Samsung Galaxy S10
・Samsung Galaxy S20+
・SHARP AQUOS Rc (701SH)
・OPPO Reno A
・Google Pixel 6a
