Make in-field adjustments to your Power Commander V.
Version
1.0.3 ( 4 )
Update
Mar 27, 2023
Developer
Category
Installs
10,000+
Rate
0
Extending the flexibility of Dynojet’s latest tuning software, C3 Mobile allows you to communicate and adjust your installed Power Commander V.
Features include:
• Download and Send maps.
• Manage and Configure Power Commander Features;
o Configure Accel Pump
o Enable REV X-tend
o Configure Quick Shifter options
o Calibrate Throttle Position
o Clear and Accept AutoTune trims
o Adjust Fuel trims
-Requires an additional On-the-Go USB cable to connect your device to the Power Commander V for full functionality.
-C3 Mobile currently only supports single device support with the Power Commander V. At this time the Secondary Fuel Module (SFM) and Ignition Module (IMV) are not supported and will need to be removed from the device network.
Please download the complete instructions here:
http://powercommander.com/downloads/Support-Released/C3/Manuals/C3MobileDocumentation_01.pdf
Features include:
• Download and Send maps.
• Manage and Configure Power Commander Features;
o Configure Accel Pump
o Enable REV X-tend
o Configure Quick Shifter options
o Calibrate Throttle Position
o Clear and Accept AutoTune trims
o Adjust Fuel trims
-Requires an additional On-the-Go USB cable to connect your device to the Power Commander V for full functionality.
-C3 Mobile currently only supports single device support with the Power Commander V. At this time the Secondary Fuel Module (SFM) and Ignition Module (IMV) are not supported and will need to be removed from the device network.
Please download the complete instructions here:
http://powercommander.com/downloads/Support-Released/C3/Manuals/C3MobileDocumentation_01.pdf
