Flash/Tweak your BMW M3 (E9x) or M5/M6 (E6x)
Allows you to read and write programs and tunes to and from the vehicle's computer - to and from your local storage.
REQUIRES EDIABASLIB FLASHED CABLE!
Features
--------
Read / Write full programs and tunes
Load / Save changes
Read / Reset diagnostic codes
Register battery
Tweaks and Tunes
REQUIRES EDIABASLIB FLASHED CABLE!
Supported vehicles;
E9x M3
------
Cold Start Delete
Speed Limiter Delete
Primary Cat Delete
Secondary Air Pump Delete
Post Cat O2 Sensor Delete
Neutral RPM Adjust
Drive RPM Adjust
Tune
E6x M5/M6
---------
Cold Start Delete
Speed Limiter Delete
Primary Cat Delete
Secondary Air Pump Delete
Exhaust Pops
Idle RPM Adjust
Neutral RPM Adjust
Drive RPM Adjust
Stage 1+ Tune
Throttle Response;
Adjust Comfort, Normal and Sport to any map
Maps;
Comfort, Normal, Sport, Super Sport, Linear
Instructions;
First Time Use (MSS60) [M3 E9x]:
Before the app lets you do anything, it has to identify what it is connected to. Connect the cable to your car and identify your DME. Now more buttons and menus should be active.
Read a full dump from your DME. After it is done, a full backup, as well as a copy of your tune will be saved in a folder with the last 7 digits of your VIN. Keep that backup in a safe location.
Click load file, and select the full dump you just made.
Click the top-right menu and pick one RSA bypass.
First Time Use (MSS65) [M5/M6 E6x]:
If you just want to flash tunes, then simply make a backup of your existing tune, modify whatever you want, and flash that back to the DME. That’s it – no patches, bypasses, etc needed.
If you want to tinker with low-level code and mess with the program itself, then you will need to flash the RSA bypass like the MSS60 instructions above
If using a bad cable, fast will be a guaranteed permanent brick, you need an EDIABASLIB flashed cable.
After that process is done, you’ll be prompted to flash your tune. You could click “flash tune” now to flashback what was already there, or if you already have a modified file you want to flash, you can load that now
That’s pretty much it, you can now flash tunes and programs to your DME as you please.
REQUIRES EDIABASLIB FLASHED CABLE!
If you flash with a regular cable that isn't flashed with EdiabasLib, you will brick your DME.
Purchase links;
US: https://www.bimmergeeks.net/product-page/bimmergeeks-pro-cable
UK: https://www.ecuworx.co.uk/product/ecuworx-flashing-cable-for-e60-m5-e65-m6-and-e92-m3/
ENGLISH ONLY
REQUIRES EDIABASLIB FLASHED CABLE!
Features
--------
Read / Write full programs and tunes
Load / Save changes
Read / Reset diagnostic codes
Register battery
Tweaks and Tunes
REQUIRES EDIABASLIB FLASHED CABLE!
Supported vehicles;
E9x M3
------
Cold Start Delete
Speed Limiter Delete
Primary Cat Delete
Secondary Air Pump Delete
Post Cat O2 Sensor Delete
Neutral RPM Adjust
Drive RPM Adjust
Tune
E6x M5/M6
---------
Cold Start Delete
Speed Limiter Delete
Primary Cat Delete
Secondary Air Pump Delete
Exhaust Pops
Idle RPM Adjust
Neutral RPM Adjust
Drive RPM Adjust
Stage 1+ Tune
Throttle Response;
Adjust Comfort, Normal and Sport to any map
Maps;
Comfort, Normal, Sport, Super Sport, Linear
Instructions;
First Time Use (MSS60) [M3 E9x]:
Before the app lets you do anything, it has to identify what it is connected to. Connect the cable to your car and identify your DME. Now more buttons and menus should be active.
Read a full dump from your DME. After it is done, a full backup, as well as a copy of your tune will be saved in a folder with the last 7 digits of your VIN. Keep that backup in a safe location.
Click load file, and select the full dump you just made.
Click the top-right menu and pick one RSA bypass.
First Time Use (MSS65) [M5/M6 E6x]:
If you just want to flash tunes, then simply make a backup of your existing tune, modify whatever you want, and flash that back to the DME. That’s it – no patches, bypasses, etc needed.
If you want to tinker with low-level code and mess with the program itself, then you will need to flash the RSA bypass like the MSS60 instructions above
If using a bad cable, fast will be a guaranteed permanent brick, you need an EDIABASLIB flashed cable.
After that process is done, you’ll be prompted to flash your tune. You could click “flash tune” now to flashback what was already there, or if you already have a modified file you want to flash, you can load that now
That’s pretty much it, you can now flash tunes and programs to your DME as you please.
REQUIRES EDIABASLIB FLASHED CABLE!
If you flash with a regular cable that isn't flashed with EdiabasLib, you will brick your DME.
Purchase links;
US: https://www.bimmergeeks.net/product-page/bimmergeeks-pro-cable
UK: https://www.ecuworx.co.uk/product/ecuworx-flashing-cable-for-e60-m5-e65-m6-and-e92-m3/
ENGLISH ONLY
